EVO 2T 250


Technical Data

Frame Single wave aluminium beam
Wheel base 1305mm
Max length 1990mm
Max width 850mm
Max height 1115mm
Seat height 660mm
Ground clearance 310mm
Footrest height 348mm
Fuel tank capacity 2.8l
Reserve 0.5l
Cooling system capacity 600cc
Front suspension Hydraulic fork with Ø38mm shaft
Rear suspension Hydraulic monoshock
Shock absorber stoke 62mm
Front wheel travel 165mm
Rear wheel travel 180mm
Front brake disc Ø185mm with 4 piston caliper
Rear brake disc Ø160mm with 2 piston caliper
Front rim 21 x 1.6 - 32 holes
Rear rim 18 x 2.15 - 32 holes
Front tyre 2.75 - 21
Rear tyre 4.00 R 18
Type Single-cylinder, 2 stroke, liquid cooled, lamellar induction in the crankcase
Bore 72.5mm
Stroke 60.5mm
Displacement 249.7cc
Compression ratio 8.9:1
Ignition Electronic Hidria 12V - 110W
Spark Plug NGK BPR7 ES
Lubrication mix with fuel 1.5% (synthetic oil)
Feeding with carburettor
Carburettor Keihin PWK Ø28mm
Spark advance Variable
Clutch Wet multi-disc clutch with cush-drive rubber
Primary transmission Z. 22/69
Transmission 6 speed
Secondary transmission Z. 10/42
Engine oil SAE 20W/30 (550cc)
Our website is protected by DMC Firewall!